|
Post by paladdin on Aug 23, 2012 5:06:00 GMT -6
Hi there! We are writting you from Spain Some folks have a bunch of your guns, and one of them burned the battery wires. After changing the wires now the gun turns on, but keep saying 'More Reset' and 'Factory Reset' in the display endlessly. Some advice about that? Thanks!
|
|
|
Post by diamonddiggidydave on Aug 27, 2012 18:59:30 GMT -6
Sounds like the gun is seeing all of the buttons pressed down when turning the gun on. Since you're not actually doing that (I assume!), either the contacts fused together on all of your buttons or the board shorted out across the header which goes to the buttons. The second one seems more probable to me, but it's easy enough to check; swap the buttons on that gun with another gun and see if the problem transfers over. If not, it's probably your board; swap it out and you should be good to go.
|
|
|
Post by paladdin on Aug 30, 2012 5:02:18 GMT -6
Thanks for your support! Will give it a try
|
|